Motor

The grblShield is a complete hardware solution for Dank’s CNC motion control system called grbl. Plug and play compatible with grbl 0.6 Three stepper motors supporting X, Y and Z axes 8x microstepping 2.5 amps per winding (bipolar steppers) 12v-30v motor voltage supported

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to control two DC motors at once, both CW and….

This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same VIN line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines….

High-current H-bridge using a pair of VNH2SP30 full-bridge motor drivers. VIN and motor out are pitched for 5mm screw terminals to suit large gauge wires.

The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.

The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3. This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps….

Dual L293 H-bridge motor driver.

Controls DC motors. Multiple outputs: The board uses a pair of L293 Dual H-Bridge driver circuits to drive up to 4 separate DC motors. High Power: The QuadMotor shield uses the L298 to allow a motor supply voltage of up to 46V and a DC current of up to 4A DC on an individual channel…..

The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC motors or a step motor. The Motor Shield can either be powered directly by Arduino….

The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Arduino/Seeeduino board, controlling the speed and direction of each one independently. You can also measure the motor….