Arduino Yawp Patch Shield v4.0
*Product is discontinued or obsolete , It is here just for your information
Arduino Yawp Patch Shield v4.0 Description
The patch shield is a cross between a patch panel/bay and a Wingshield. It’s designed for times when you want to have remote sensors, or a control panel, or LEDs, or…practically anything where you want to avoid doing a lot of icky wiring! The origins of this shield are unclear. It appears to originate at the site linked above. For kit information see: http://www.adafruit.com/index.php?main_page=product_info&cPath=17_21&products_id=256
Arduino Yawp Patch Shield v4.0 Pins Note:
No pins are reserved by the shield: it simply breaks them all out to connectors.
Tags:
Maker: Yawp
Open Source: yes
License: CC BY-SA 3.0
Source: http://info.yawp.com/kits/patch-shield-v04/d3-pcb-eagle.html
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Yawp Patch Shield v4.0 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
