Arduino Unified Microsystems ATS-1 Terminal Shield
Arduino Unified Microsystems ATS-1 Terminal Shield Description
The ATS-1 Terminal Shield is a user interface module. Since it uses serial communications to the Arduino, it only uses the D0 and D1 I/O lines leaving the others for the application. Any other two I/O lines can be used if the program uses a software serial driver.
Other Features:
16X2 LCD Display
6 Navigation Switches
LED
Buzzer
Master Reset Switch
Arduino Unified Microsystems ATS-1 Terminal Shield Pins Note:
Defaults to D0 & D1. Can be wire jumpered to any other 2 digital I/O pins if the program uses a software serial driver (available from Arduino site).
Tags: display , lcd
Maker: Unified Microsystems
Open Source: no
License: Proprietary/closed source
Source: Unknown
Shield Version:
Voltage: 5V
Current Draw: 150ma
Price: $29.95
Arduino Unified Microsystems ATS-1 Terminal Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
