Arduino Synthetos GRBL Shield
Arduino Synthetos GRBL Shield Description
The grblShield is a complete hardware solution for Dank’s CNC motion control system called grbl.
Plug and play compatible with grbl 0.6
Three stepper motors supporting X, Y and Z axes
8x microstepping
2.5 amps per winding (bipolar steppers)
12v-30v motor voltage supported
Arduino Synthetos GRBL Shield Pins Note:
Tags: control , motor
Maker: Synthetos
Open Source: Unknown
License: Unknown
Source: http://github.com/synthetos/grblShield/tree/master/hardware
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Synthetos GRBL Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
