Arduino Sparkfun VoiceBox Shield
Arduino Sparkfun VoiceBox Shield Description
The VoiceBox Shield uses SpeakJet voice and sound synthesizer chip to convert serial commands into a robot-sounding voice.
Includes a two stage audio amplifier with a volume control.
You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet’s serial input.
Arduino Sparkfun VoiceBox Shield Pins Note:
Tags: audio , speech
Maker: Sparkfun
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Sparkfun VoiceBox Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
