Arduino Sparkfun PowerDriver Shield
Arduino Sparkfun PowerDriver Shield Description
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET for full specifications on how much current this board can handle.
Arduino Sparkfun PowerDriver Shield Pins Note:
Tags: control , output
Maker: Sparkfun
Open Source: yes
License: CC BY-SA 3.1
Source: http://www.sparkfun.com/datasheets/DevTools/Arduino/PowerDriver-Shield-v12.zip
Shield Version: V1.0
Voltage:
Current Draw:
Price: $21.95
Arduino Sparkfun PowerDriver Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
