Arduino Sparkfun Joystick Shield
Arduino Sparkfun Joystick Shield Description
The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
Arduino Sparkfun Joystick Shield Pins Note:
Tags: button , input , joystick
Maker: Sparkfun
Open Source: yes
License: CC BY-SA 3.0
Source: http://www.sparkfun.com/datasheets/DevTools/Arduino/Joystick_Shield-v13.zip
Shield Version: V1.0
Voltage:
Current Draw:
Price: $14.95
Arduino Sparkfun Joystick Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
