Arduino SonikTech SENPAI Shield
Arduino SonikTech SENPAI Shield Description
AVR Multiprogrammer. Allows you to burn ATMega and ATTiny chips using your Arduino.
Arduino SonikTech SENPAI Shield Pins Note:
SS, MOSI, MISO, and SCK pins are used for programming. D7, D8, and D9 are optional, and are used for troubleshooting the programmer.
Tags:
Maker: SonikTech
Open Source: no
License: CC BY-NC-SA 3.0
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino SonikTech SENPAI Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
