Arduino Snootlab Power ScrewShield
*Product is discontinued or obsolete , It is here just for your information
Arduino Snootlab Power ScrewShield Description
A prototyping screw shield for Arduino with 12V on board through ATX Power supply connector and an SMD solder zone.
Arduino Snootlab Power ScrewShield Pins Note:
All pins are free and available for user on top of the shield. Arduino LED and reset switch are on top of the board.
Tags: prototyping
Maker: Snootlab
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Snootlab Power ScrewShield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
