Arduino Seeed Studio Stem Base Shield
Arduino Seeed Studio Stem Base Shield Description
Stem is the new version of Electronic Brick Shield. All connections have been standardized onto 4 pins( Signal 1, Signal 2, VCC, and GND) 2mm connectors, which simplify the wiring of electronics projects.
Arduino Seeed Studio Stem Base Shield Pins Note:
No pins specifically used: all broken out for Stem connectors.
Tags:
Maker: Seeed Studio
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version: v1.3
Voltage:
Current Draw:
Price: $8.90
Arduino Seeed Studio Stem Base Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
