Arduino Seeed Studio Stalker
Arduino Seeed Studio Stalker Description
Wireless sensor network node with data logging.
Native RTC, On board CR2032 battery holder.
GPS.
XBee wireless networking.
Native micro SD card socket.
Stackable I2C pin header.
Dual voltage (5V/3.3V) I2C hub.
User defined button and LED.
Unusually, this shield can be used either as a regular shield to another Arduino, or standalone using an onboard ATmega MCU.
Arduino Seeed Studio Stalker Pins Note:
In shield mode A4 and A5 are used for I2C communications with the host Arduino.
Tags: communications , gps , rtc , sensor , xbee
Maker: Seeed Studio
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage: 5V/3.3V
Current Draw:
Price:
Arduino Seeed Studio Stalker Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
