Arduino Seeed Studio Bees Shield
Arduino Seeed Studio Bees Shield Description
Holds 2 xBee or compatible modules, has a 3.3V regulator, small prototyping area and reset buttons for both the Arduino and one for each xBee footprint.
Switch to change the connection of the xBee socket to the serial pins to “cross over” to allow the xBee to be programmed via the FTDI from the host computer. Activity LEDs for both xBee sockets.
Arduino Seeed Studio Bees Shield Pins Note:
Lot of jumpers to connect the second xBee socket to a variety of pins for softserial.
Tags: communications , prototyping , xbee
Maker: Seeed Studio
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Seeed Studio Bees Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
