Arduino Samurai Circuits Cool Neon Shield
*Product is discontinued or obsolete , It is here just for your information
Arduino Samurai Circuits Cool Neon Shield Description
10 channel electroluminescent wire (EL wire) controller. Works in combination with an external CoolNeon driver. The Triacs used are rated for 600 volts at up to 1 amp, so should work with the biggest drivers. Also includes opto-isolation for complete isolation between the Arduino and the AC power lines.
Pattern indicating LEDs.
Pattern speed control thumwheel.
Two input buttons.
Arduino Samurai Circuits Cool Neon Shield Pins Note:
Unfortunately no schematics provided by the manufacturer.
All of the I/O ports are fully reconfigurable, with designated places on the bottom of the PCB to cut the traces and places to solder in new jumpers.
Tags: output
Maker: Samurai Circuits
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Samurai Circuits Cool Neon Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
