Arduino Rugged Circuits Gadget Shield
Arduino Rugged Circuits Gadget Shield Description
The Gadget Shield includes:
A Freescale MMA7361L 3-axis accelerometer.
A high-brightness RGB LED.
38kHz logic infrared detector.
Infrared LED.
Visible light sensor.
Four LEDs.
Two thumbwheel potentiometers.
Two general-purpose momentary-contact pushbuttons.
Arduino Rugged Circuits Gadget Shield Pins Note:
The product info page has excellent documentation on pin assignments and example code, including the schematic and a table that cross-references the pin usage against pin names on the Arduino Mega, Duemilanove, and the GATOR: www.ruggedcircuits.com/html/gadget_shield.html.
Tags: acceleromater , input , ir , led , light , sensor
Maker: Rugged Circuits
Open Source: no
License: Proprietary / closed source
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Rugged Circuits Gadget Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
