Arduino RepRap Research Foundation Breakout Shield v1.4
Arduino RepRap Research Foundation Breakout Shield v1.4 Description
The Arduino Breakout Shield provides all the Arduino pins as screw terminals. It is perfect for semi-permanent Arduino projects, or just general prototyping. It also provides extra GND, 3.3V, 5V, and Supply voltage pins for convenience.
Version 1.4 fixes a potential short problem, and adds additional female headers to allow shield stacking.
Arduino RepRap Research Foundation Breakout Shield v1.4 Pins Note:
Tags: prototyping
Maker: RepRap Research Foundation
Open Source: yes
License: GPL v2
Source: Unknown
Shield Version: v1.4
Voltage: 3.3v/5v
Current Draw:
Price: $5.00
Arduino RepRap Research Foundation Breakout Shield v1.4 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
