Arduino Practical Maker PWM Shield
*Product is discontinued or obsolete , It is here just for your information
Arduino Practical Maker PWM Shield Description
The PWM Shield for the Arduino allows you to add 32 PWM outputs to your Arduino. They are daisy-chainable (easy to do with a jumper wire) so you can add up to 640 outputs (or until the Arduino can’t provide enough power).
Arduino Practical Maker PWM Shield Pins Note:
Tags: control , output , pwm
Maker:
Open Source: yes
License: CC BY-SA 3.0
Source: http://www.practicalmaker.com/tutorials/pwm-shield-documentation
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Practical Maker PWM Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
