Arduino MightyOhm AVR HV Rescue Shield 2
Arduino MightyOhm AVR HV Rescue Shield 2 Description
The HV Rescue Shield 2 is a high voltage parallel mode fuse programmer for Atmel AVR microcontrollers.
It currently supports a wide variety of AVR chips, including the 28-pin ATmega48/88/168/328 series, the 20-pin ATtiny2313, and many 8-pin ATtiny devices (such as the ATtiny25/45/85 and ATtiny13A). A list of supported devices is in progress.
Arduino MightyOhm AVR HV Rescue Shield 2 Pins Note:
Tags: programmer
Maker: MightyOhm
Open Source: yes
License: CC BY-SA 3.0
Source: http://mightyohm.com/blog/products/hv-rescue-shield-2-x/design-files/
Shield Version: V2.1
Voltage: 12V
Current Draw:
Price:
Arduino MightyOhm AVR HV Rescue Shield 2 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
