Arduino Logos Electromechanical 16-Channel High-Current Driver Shield
Arduino Logos Electromechanical 16-Channel High-Current Driver Shield Description
Sixteen high current driver channels, each capable of sourcing 5A @ 30V. Over-temperature, over-voltage, and over-current protection is included on all channels. Shift register controls allows the shield to use only four pins and the shiftOut() library function. An expansion connector allows up to 25 shields to be daisy chained for as many as 400 channels.
Arduino Logos Electromechanical 16-Channel High-Current Driver Shield Pins Note:
D7: Latch
D8: Master Reset (active low)
D12: Serial Clock
D13: Serial In
Tags: control , output
Maker: Logos Electromechanical
Open Source: yes
License: CC BY-SA 3.0
Source: http://wiki.logos-electro.com/4x4-driver-shield
Shield Version:
Voltage: 30V
Current Draw: 5A
Price:
Arduino Logos Electromechanical 16-Channel High-Current Driver Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
