Arduino LinkSprite WiFi Shield
*Product is discontinued or obsolete , It is here just for your information
Arduino LinkSprite WiFi Shield Description
The LinkSprite WiFi Shield has built-in TCP/IP stack and all the WiFi related code. The Arduino just configures the WiFi parameters using AT command through the UART, or the user can simply treat the WiFi as a transparent serial port after some offline configuration.
Arduino LinkSprite WiFi Shield Pins Note:
Tags: communications , network , wifi
Maker: LinkSprite
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino LinkSprite WiFi Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
