Arduino John Liu Phi-Connect Shield
Arduino John Liu Phi-Connect Shield Description
Phi-connect is a wire/cable management system for Arduino. It passes all Arduino connections to a breadboard with one cable. You can connect your Arduino to a project with just one step.
Arduino John Liu Phi-Connect Shield Pins Note:
No pin is used by the phi-connect shield. All Arduino pins are passed from Arduino to breadboard breakout board. With stacking female headers and right-angle double row male headers, any shield can stack above the phi-connect.
Tags: breakout , converter
Maker: John Liu
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage: 5V
Current Draw:
Price: $12.95
Arduino John Liu Phi-Connect Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
