Arduino Jee Labs Plug Shield
Arduino Jee Labs Plug Shield Description
The Plug Shield allows using I2C-based JeePlugs with any Arduino or compatible clone. It acts as interface between the hardware I2C port and the plugs. There is a level converter on board, as well as a 3.3V regulator to supply power to the plugs. The reset button and ISP signals are duplicated on the shield.
Arduino Jee Labs Plug Shield Pins Note:
Pins A4 and A5 remain usable for I2C at 5V.
Tags: i2c
Maker: Jee Labs
Open Source: yes
License: CC BY 3.0
Source: http://cafe.jeelabs.net/lab/ps1/#index3h1
Shield Version:
Voltage: 3.3V
Current Draw:
Price: €4.50
Arduino Jee Labs Plug Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
