Arduino ITead Studio ITDB02 LCD Shield v1.3
Arduino ITead Studio ITDB02 LCD Shield v1.3 Description
The ITDB02 LCD module is available in several different versions supported by this shield:
ITDB02-2.4: 2.4″, 8-bit with touch sensor.
ITDB02-2.4WOT: 2.4″, 8-bit without touch sensor.
ITDB02-3.2: 3.2″, 16-bit.
Arduino ITead Studio ITDB02 LCD Shield v1.3 Pins Note:
Pins D8 to D13 are jumper selectable betwen SD, Touch and 16 bit mode.
Combinations:
1.- 16 bit only
2.- 8bit + Touch
3.- 8bit + SD card
Tags: display , lcd , touch
Maker: ITead Studio
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version: V1.3
Voltage:
Current Draw:
Price:
Arduino ITead Studio ITDB02 LCD Shield v1.3 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
