Arduino ITead Studio IBridge 3x3 Keypad Shield
Arduino ITead Studio IBridge 3x3 Keypad Shield Description
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino and IFLAT-32, you can plug it on Arduino/IFLAT-32 board directly, and you can get the small development platform with keypad input and Graphic LCD display.
Arduino ITead Studio IBridge 3x3 Keypad Shield Pins Note:
The spi bus pin description seems to be off from the typical SPI mapping. It could be a documentation error in the datasheet.
Tags: button , display , input , lcd
Maker: ITead Studio
Open Source: no
License: Unknown
Source: Unknown
Shield Version: V1.0
Voltage: 3.3 V and 5V
Current Draw:
Price: $6.00
Arduino ITead Studio IBridge 3x3 Keypad Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
