Arduino GeekOnFire GPRS/GSM Shield
*Product is discontinued or obsolete , It is here just for your information
Arduino GeekOnFire GPRS/GSM Shield Description
The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (all 2V8 logic) present onboard.
Arduino GeekOnFire GPRS/GSM Shield Pins Note:
Tags:
Maker: GeekOnFire
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino GeekOnFire GPRS/GSM Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
