Arduino Freetronics ProtoShield Pro
*Product is discontinued or obsolete , It is here just for your information
Arduino Freetronics ProtoShield Pro Description
General-purpose prototyping shield designed to provide maximum prototyping area. Supporting parts are pre-fitted as surface-mount components.
Includes a reset button wired to the Arduino reset line; a general-purpose pushbutton switch with pull-up resistor; blue power LED; general-purpose red and green LEDs with active-high inputs; and two smoothing capacitors.
Arduino Freetronics ProtoShield Pro Pins Note:
No pins specifically used on the shield. All headers except the ICSP header are exposed as breakout pads on the PCB.
Tags: prototyping
Maker: Freetronics
Open Source: yes
License: TAPR Open Hardware License
Source: http://github.com/freetronics/ProtoShieldPro
Shield Version:
Voltage:
Current Draw:
Price:
Arduino Freetronics ProtoShield Pro Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
