Arduino Freetronics Ethernet Shield
Arduino Freetronics Ethernet Shield Description
The Freetronics Ethernet Shield is based on the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, and is 100% compatible with the Ethernet library and sketches. It also incorporates support for PoE (Power-over-Ethernet) using either official 802.3af (48V) or lower voltage DIY injectors. Spare shield area is available as a prototyping area.
Arduino Freetronics Ethernet Shield Pins Note:
Tags: ethernet , network , poe , prototyping
Maker: Freetronics
Open Source: yes
License: TAPR Open Hardware License
Source: http://github.com/freetronics/EthernetShield
Shield Version:
Voltage:
Current Draw:
Price: $44.95
Arduino Freetronics Ethernet Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
