The DollyShield is for DIY motion control for timelapse and videography. Controls a camera dolly.

Provides all elements necessary for a stand-alone user interface, an integrated and isolated camera connection, easy access to the hardware serial pins through a stereo jack, and an additional stereo jack connecting to pins D2 and D3 to allow for the use of encoders or limit switches. D2 and D3 are chosen for their association with hardware interrupts which increase the reliability of encoder or limit switch actions.

D0: Ext_0 (Ring) D1: Ext_0 (Tip) D2: Ext_1 (Ring) D3: Ext_1 (Tip) D4: LCD D7 D5: Motor 0 PWM D6: Motor 1 PWM D7: LCD D6 D8: LCD D5 D9: LCD Backlight PWM D10: n/c D11: LCD D4 D12: Focus (Cam Ring, OK1/1) D13: Shutter (Cam Tip, OK1/2) A0: Pushbuttons A1: Motor 0 DIR A2: Motor 1 DIR A3: LCD DIR A4: LCD EN A5: n/c

         Tags: camera , motor , photography 

Arduino Dynamic Perception DollyShield Pinouts

				AREF
				GND
				D13 / SCK
				D12 / MISO
RESET				D11/MOSI~
3.3V				D10 / SS ~
5V				D9 ~
GND				D8
GND
VIN				D7
				D6 ~
A0				D5 ~
A1				D4
A2				D3 ~
A3				D2
A4				D1 / TX
A5				D0 / RX