Arduino DSS Circuits I2C GPS Shield
Arduino DSS Circuits I2C GPS Shield Description
Access most of the commonly used GPS data using the I2C protocol. Features a 66 channel 10 Hz GPS receiver with an ultra low -165dBm sensitivity
Arduino DSS Circuits I2C GPS Shield Pins Note:
Pins D0-D3 and D7-D10 are optional usage pins for serial communication and/or interrupts which can be activated via software. By default these pins are in a high impedance state and will not interfere with other signals on the same pins.
Tags: gps
Maker: DSS Circuits
Open Source: no
License: Unknown
Source: Unknown
Shield Version: V2
Voltage: 3V
Current Draw:
Price:
Arduino DSS Circuits I2C GPS Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
