Arduino DFRobot Mega I/O Expansion Shield V1.0
*Product is discontinued or obsolete , It is here just for your information
Arduino DFRobot Mega I/O Expansion Shield V1.0 Description
The sensor expansion board is able to easily connect a number of commonly used sensors.
Note: On the PCB itself this shield is labelled “Sensor Shield”, but on the webpage it’s listed as “Mega IO Expansion Shield”. I have used the title on the page as the definitive name, but it may also be referred to as a “Sensor Shield” in some contexts.
Arduino DFRobot Mega I/O Expansion Shield V1.0 Pins Note:
Appears to break out all pins to connectors without specifically using any of them, but there is no documentation provided on the site at all.
Tags: breakout , connector , sensor
Maker: DFRobot
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino DFRobot Mega I/O Expansion Shield V1.0 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
