Arduino DFRobot 2A Motor Shield
Arduino DFRobot 2A Motor Shield Description
Uses the L293 chip to drive two 7-12V DC motors with up to 2A current.
The shield can be powered directly from the Arduino or from an external power source.
Arduino DFRobot 2A Motor Shield Pins Note:
PWM Mode:
D4 = Motor 2 Direction control
D5 = Motor 2 PWM control
D6 = Motor 1 PWM control
D7 = Motor 1 Direction control
PLL Mode:
D4 = Motor 2 Enable control
D5 = Motor 2 Direction control
D6 = Motor 1 Direction control
D7 = Motor 1 Enable control
Tags: control , motor , output
Maker: DFRobot
Open Source: Unknown
License: Unknown
Source: Unknown
Shield Version:
Voltage: 6.5~12v
Current Draw:
Price: $16.50
Arduino DFRobot 2A Motor Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
