Arduino CuteDigi Quad-band GPRS/GSM Shield
*Product is discontinued or obsolete , It is here just for your information
Arduino CuteDigi Quad-band GPRS/GSM Shield Description
This is an Arduino Shield for SM5100 quad-band GSM/GPRS module. The module is included.
Arduino CuteDigi Quad-band GPRS/GSM Shield Pins Note:
J1 and J2 are used to choose how RX/TX of SM5100B is going to connected to Arduino.
RX/TX is the RX/TX of SM5100B module.
MTX/MRX is the TX/RX of Atmega328.
D3 and D2 are the I/O of Atmega328 if soft serial is used.
Connect RX to MRX, and remove atmega328, so USB port of arduino can be used to directly to talk to SM5100B.
Tags: communication , gprs , gsm
Maker: CuteDigi
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino CuteDigi Quad-band GPRS/GSM Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
