Arduino CuteDigi GPS Shield With SD Card
*Product is discontinued or obsolete , It is here just for your information
Arduino CuteDigi GPS Shield With SD Card Description
This is the GPS SR92 module for Arduino with a SD card slot.
CuteDigi
Arduino CuteDigi GPS Shield With SD Card Pins Note:
The GPS needs to be jumpered to the shield.
Pin 1: GND
Pin 2: VCC Power supply of 3.3 ~ 3.5 VDC
Pin 3: TX Port A serial data output (GPS out); N-8-1, NMEA v3.00 output
Pin 4: RX Port A serial data input (GPS in); N-8-1, accepts commands from external applications, e.g. SiRFDemo.
Pin 5: 5 PWR_CTRL Hardware controlled power saving pin.
Tags: gps , sd
Maker: CuteDigi
Open Source: no
License: Unknown
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino CuteDigi GPS Shield With SD Card Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
