Arduino AsyncLabs WiShield v1.0
*Product is discontinued or obsolete , It is here just for your information
Arduino AsyncLabs WiShield v1.0 Description
Adds WiFi networking support to Arduino.
802.11b Wi-Fi certified.
1Mbps and 2 Mbps throughput speeds.
Supports both infrastructure (BSS) and ad hoc (IBSS) wireless networks.
WEP, both 64-bit and 128-bit.
WPA/WPA2 (TKIP and AES) PSK.
Arduino AsyncLabs WiShield v1.0 Pins Note:
D2 is used for an interrupt, but can be switched to D8 if required.
D9 used for a connection status LED but can still be used for other purposes.
Tags: communications , network , wifi
Maker: AsyncLabs
Open Source: yes
License: CC BY-SA 2.5
Source: Unknown
Shield Version:
Voltage:
Current Draw:
Price:
Arduino AsyncLabs WiShield v1.0 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
