Arduino AeroQuad AeroQuad Shield v2.0
*Product is discontinued or obsolete , It is here just for your information
Arduino AeroQuad AeroQuad Shield v2.0 Description
AeroQuad Shield is intended for use creating Quadrotor Helicopters controlled by an Arduino.
The AeroQuad Shield v2.0 allows you to easily connect the ITG 3200 triple axis gyro and the BMA 180 triple axis accelerometer breakout boards to an Arduino Mega to create a 6 degree of freedom inertial measurement unit (IMU). Additionally other I2C sensors are directly supported: the BMP 085 barometer for altitude determination and the HMC 5843 magnetometer for heading hold.
Note: The images on the AeroQuad site have an explicit message prohibiting their re-use. I need an image for this shield that I have permission to use.
Arduino AeroQuad AeroQuad Shield v2.0 Pins Note:
Tags: accelerometer , barometer , gyroscope , imu , magnetometer
Maker: AeroQuad
Open Source: yes
License: GPL v4
Source: http://code.google.com/p/aeroquad/source/browse/trunk/Documentation/Shield/#Shield/AeroQuad_v1.10
Shield Version:
Voltage:
Current Draw:
Price:
Arduino AeroQuad AeroQuad Shield v2.0 Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
