Arduino Adafruit Industries Logger Shield
Arduino Adafruit Industries Logger Shield Description
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real time clock (RTC) keeps the time going even when the Arduino is unplugged. Prototyping area for soldering connectors, circuitry or sensors. Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
Arduino Adafruit Industries Logger Shield Pins Note:
Tags: sd , storage
Maker: Adafruit Industries
Open Source: yes
License: CC BY-SA 2.5
Source: Unknown
Shield Version: Old
Voltage: 3.3v
Current Draw:
Price: $24.80
Arduino Adafruit Industries Logger Shield Pinouts
| AREF | ||||
| GND | ||||
| D13 / SCK | ||||
| D12 / MISO | ||||
| RESET | D11/MOSI~ | |||
| 3.3V | D10 / SS ~ | |||
| 5V | D9 ~ | |||
| GND | D8 | |||
| GND | ||||
| VIN | D7 | |||
| D6 ~ | ||||
| A0 | D5 ~ | |||
| A1 | D4 | |||
| A2 | D3 ~ | |||
| A3 | D2 | |||
| A4 | D1 / TX | |||
| A5 | D0 / RX | |||
