Universal e-Paper Raw Panel Driver HAT
Description
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper displays from Waveshare.
Features
- Standard Raspberry Pi 40PIN GPIO extension header
- Supports Raspberry Pi Zero/2/3/4
- SPI interface, for connecting with other controller boards like the Raspberry Pi, Arduino etc
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Included
- e-Paper Driver HAT x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
Specifications
- Operating voltage: 3.3V~5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 65mm × 30.2mm
- Mounting hole size: 3.0mm
Resources
- Product Wiki: http://www.waveshare.com/wiki/e-Paper_Driver_HAT
Interface/Pin Mapping
| Symbol | Description |
| VCC | 3.3V~5V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
Price: £ 10